Jump to content

Sobre este archivo

A reimplementation of fusee-launcher in C++ for Windows platforms.
Lets you launch fusee/shofEL2 payloads to a USB connected Switch in RCM mode.

Driver setup

 1. Get your Switch into RCM mode and plug it into your Windows PC. It should show up somewhere (like Device manager) as "APX"
 2. Download and run Zadig driver installer.


 TegraRcmSmash.exe [-V 0x0955] [-P 0x7321] [--relocator=intermezzo.bin] [-w] inputFilename.bin [-r] [--dataini=coreboot.ini] ([PARAM:VALUE]|[0xADDR:filename])*
 If your Switch is ready and waiting in RCM mode, you can also just drag and drop the payload right onto TegraRcmSmash.exe
 An example cmdline for launching linux using coreboot is something like this (the empty relocator is important):
   TegraRcmSmash.exe -w --relocator= "coreboot/cbfs.bin" "CBFS:coreboot/coreboot.rom"

 A simpler way to load coreboot/other AArch64 payloads is to use my memloader payload (see https://switchtools.sshnuke.net) and either put the files on microsd or use the --dataini parameter

 After that, you can use imx_load as you would on Linux (Windows binaries available at https://github.com/rajkosto/imx_usb_loader/releases)
 Alternatively, setup your u-boot cmdline to just load everything from microSD to not bother with imx_load ;)

For updates check https://switchtools.sshnuke.net
Source code available at https://github.com/rajkosto/TegraRcmSmash

**I am not responsible for anything, including dead switches, blown up PCs, loss of life, or total nuclear annihilation.*

Críticas de usuarios

Comentarios recomendados

No hay comentarios para mostrar

Crear una cuenta o conéctate para comentar

Tienes que ser miembro para dejar un comentario

Crear una cuenta

Regístrese para obtener una cuenta nueva en nuestra comunidad. ¡Es fácil!

Registrar una nueva cuenta


¿Ya tienes una cuenta? Conéctate aquí.

Conectar ahora