227 archivos
-
qBittorrent
qBittorrent is a bittorrent client programmed in C++ / Qt that uses libtorrent (sometimes called libtorrent-rasterbar) by Arvid Norberg.
It aims to be a good alternative to all other bittorrent clients out there. qBittorrent is fast, stable and provides unicode support as well as many features.
The main features are:
similar user interfaces with µTorrent (for a smooth transition). integrated and customizable search: on most famous BitTorrent search sites. support for all BitTorrent extensions: Magnet/BitComet, Peer Exchange, DHT, etc. advanced control for trackers, peers, and torrents (torrent queueing and prioritizing). support for UPnP / NAT-PMP port forwarding. bandwidth scheduler and sequential download. IP Filtering (compatible with eMule and PeerGuardian) and IPv6 compliant. detailed torrent info: size, status, seeds, peers, download and upload speed, ratio, etc. by sledgehammer999.
-
Quibble
Quibble is the custom Windows bootloader - an open-source reimplementation of the files bootmgfw.efi and winload.efi, able to boot every version of Windows from XP to Windows 10 1909. Unlike the official bootloader, it is extensible, allowing you to boot from other filesystems than just NTFS.
This is only a proof of concept at this stage - don't use this for anything serious.
Installation
This has been tested with Qemu using the OVMF firmware, with Seabios included as a Compatibility Support Module (CSM). It may work on other VMs or hardware, it may not. You will need the CSM version of OVMF, which isn't the usual one bundled with Qemu. Precompiled version are available: x86 and amd64.
Set up your VM, and install Windows on an NTFS volume. Install WinBtrfs - you will need version 1.6 at least. On modern versions of Windows, turn off Fast Startup in the Control Panel. Shutdown your VM, and copy its hard disk to a Btrfs partition. Surprisingly, there isn't an easy way to copy an NTFS volume exactly - you can try using robocopy on Windows, but you'll run into files you can't easily access, even as Admin. RunAsTI helps, but it's still not easy. Robocopy doesn't like symlinks, either. Better, you can mount the volume on Linux and use rsync. This does have the down side that you'll lose the DOS attributes and the security descriptors. On Windows 8, you will need to use icacls to give C:\Users[USERNAME]\AppData\LocalLow a mandatory integrity level of "Low", otherwise it will crash on login. On some versions of Windows 10 (1607 to 1803?), you will need to give the pseudo-group "ALL APPLICATION PACKAGES" access to C:\Windows\Fonts, or you'll have the amusing sight of Windows not being able to display any text. Extract the Quibble package into your EFI System Partition. It's supposed to work in a subdirectory, but if you have trouble you might need to put it in the root. Adjust the file freeldr.ini, if necessary - the default is for it to boot from the first partition of the first disk. You can also change the SystemPath to e.g. SystemPath=btrfs(1e10b60a-8e9d-466b-a33a-21760829cf3a)\Windows, referring to the partition by UUID rather than number. Add quibble.efi to your list of UEFI boot options, and hope that it works... FAQs
Which versions of Windows does this work on? With the Btrfs driver, this should work on XP, Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 versions 1507 to 1909. XP and Vista work only in 32-bit mode for the time being. Earlier versions ought to work, as the boot structures were backwards-compatible at that point, but the Btrfs driver won't work.
Which filesystems does this support? The included Btrfs driver, and maybe also the FAT driver that's part of the UEFI specifications. Windows XP, Vista, and 7 will work fine from a FAT volume, though why you'd want to do that is anyone's guess.
How can I extend this? Drop your EFI driver in the drivers folder, and it'll load it on startup.
How do I compile this? Install a cross-compiler version of GCC - either i686-w64-mingw32-gcc or x86_64-w64-mingw32-gcc - and gnu-efi.
UWP applications / the Start Menu / Calculator / Edge don't work I know. This is at least partly due to the NTFS permissions not being transferred. You can use Win+R to open the Run menu.
Why do I get a message about the Recycle Bin being corrupted? Again, permissions. Let Windows fix it and it won't happen again.
How do I stop Notepad popping up on startup? Mark the files C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\desktop.ini and C:\Users[USERNAME]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup\desktop.ini.
Why do I get a message about Sequence1 and Sequence2? This means that the Registry is unclean, which we can't currently recover from. If you attach C:\Windows\System32\config\SYSTEM to another machine via Regedit temporarily, it'll fix it. Make sure you shut Windows down properly to avoid having to do this.
Can I boot Btrfs from an arbitrary subvolume, like I can on Linux? Yes - add /SUBVOL=xxx to your Options in freeldr.ini. You can find the number to use on the Properties page of your subvolume. Bear in mind that unlike Linux this is in hexadecimal.
Known issues
Windows can hang while flushing the Registry Multiple cores can be a bit ropey To-do list
Get compiling with MSVC Booting on Windows 8+ without CSM Get Windows 8.1 and 10 network debugging working Get working with XP and Vista on amd64 Add NTFS driver Parse BCD files Get working better on real hardware Add Registry recovery Add ARM and Aarch64 versions Verification of signatures Early-launch anti-malware ASLR Booting 32-bit Windows on 64-bit machine Add RAID support for Btrfs Add compression support for Btrfs Hibernation, etc. by maharmstone.
-
Radarr
Radarr es un gestor de colecciones de películas para usuarios de Usenet y BitTorrent. Puede monitorizar múltiples fuentes RSS para nuevas películas y se interconectará con clientes e indexadores para cogerlas, ordenarlas y renombrarlas.
También puede configurarse para actualizar automáticamente la calidad de los archivos existentes en la biblioteca cuando esté disponible un formato de mejor calidad.
Tenga en cuenta que sólo se admite un tipo de película determinada. Si quieres una versión 4k y una versión 1080p de una película determinada, necesitarás varias instancias.
Principales características de Radarr
Añadir nuevas películas con mucha información, como trailers, clasificaciones, etc. Soporte para las principales plataformas: Windows, Linux, macOS, Raspberry Pi, etc. Puede observar para una mejor calidad de las películas que tiene y hacer una actualización automática. por ejemplo, de DVD a Blu-Ray Manejo automático de descargas fallidas que intentará otra versión si una falla Búsqueda manual para que puedas elegir cualquier versión o para ver por qué una versión no se ha descargado automáticamente Integración completa con SABnzbd y NZBGet Búsqueda automática de estrenos, así como sincronización RSS Importación automática de películas descargadas Reconocimiento de Ediciones Especiales, Director's Cut, etc. Identificación de estrenos con subs codificados Identificación de estrenos con nombres de películas AKA Soporta e integra SABnzbd, NZBGet, QBittorrent, Deluge, rTorrent, Transmission, uTorrent y otros clientes de descarga Integración completa con Kodi y Plex (notificaciones, actualizaciones de la biblioteca) Importación de metadatos como trailers o subtítulos Adición de metadatos como carteles e información para que Kodi y otros puedan utilizarlos Personalización avanzada para los perfiles, de manera que Radarr siempre descargue la copia que usted desea Una hermosa interfaz de usuario -
Razer macOS
Razer macOS es una aplicación de código abierto que nos permite gestionar los efectos de color en los dispositivos de Razer a través de macOS.
Características:
Soporte para teclados, ratones, portátiles Blade, eGPU y alfombrillas de ratón de Razer. Selección de color personalizada Elija sus propios colores para efectos estáticos, reactivos y de luz estelar Configuración de color persistente Los efectos de color se guardan en la memoria integrada Funciona en los últimos macOS, incluidos Intel y Apple Silicon. No hay planes de Razer para seguir ofreciendo compatibilidad con macOS a través de Razer Synapse, cuya nueva versión es solo compatible con Windows.
Instalación
Descomprime el archivo descargado, ejecuta el .dmg y arrastra la aplicación de dentro a la carpeta Aplicaciones de tu Mac.
Si te salta una ventana de aviso de seguiridad cuando abres la aplicación, necesitas ir a Preferencias del sistema de tu Mac, Seguridad y Privacidad, General y hacer click en "abrir" en la parte inferior de la ventana para poder ejecutar Razer macOS.
Dispositivos soportados
⌨️ Teclados 🖱️ Ratones 📜 Alfombrillas de ratón 🌈 e-GPU 🎧 Auriculares 💻 Portátiles blade 🔊 Altavoces 🍺 Tazas Confirmed working for:
Keyboards: Razer BlackWidow 2019 Razer BlackWidow Elite Razer Ornata Chroma Razer Huntsman Razer Huntsman Elite Razer Huntsman TE Razer Cynosa V2 Razer Ornata V2 Mice: Razer Deathadder Elite Razer DeathAdder V2 Death Adder V2 Pro (wired and wireless) Razer Razer Lancehead Wireless Razer Viper Ultimate Wireless Razer Basilisk Ultimate Razer Basilisk V2 Razer Abyssus V2 (under older mouse effects) Razer Razer DeathAdder 2013 (under older mouse effects) Mouse mats: Razer Goliathus Extended Razer Firefly V2 Laptops: Razer Blade Advanced 2018 Headphones: Razer Kraken V2 Accessories: Razer Base Station V2 Credits
Builds on work done by these amazing projects:
openrazer osx-razer-blade osx-razer-led by 1kc.
-
Razer Streamer Companion App
Antes de ponerte manos a la obra con tu streaming, personalízalo con la aplicación Streamer Companion, donde puedes crear interacciones únicas con tu público con el hardware de Razer compatible. Diseña tus propios emoticonos y efectos de iluminación con el editor de la aplicación y aprovecha el conjunto de efectos de iluminación con 16,8 millones de colores de Razer Chroma.
EMOTICONOS Y EFECTOS DE ILUMINACIÓN PERSONALIZABLES
La aplicación Streamer Companion te permite gestionar qué emoticonos o efectos de iluminación utilizar y, lo que es más importante, el momento en el que se activarán durante el streaming. Se pueden programar para que se activen con:
NUEVOS SUSCRIPTORES NUEVOS SUSCRIPTORES NUEVOS SEGUIDORES NUEVOS SEGUIDORES DONACIONES DONACIONES PALABRAS CLAVE EN EL CHAT PALABRAS CLAVE EN EL CHAT
CREA TUS PROPIOS EMOTICONOS
Da un toque fresco y personalizado al streaming para tus seguidores. Puedes ampliar la variedad de emoticonos de dos maneras: DISEÑO EN NUESTRO EDITOR
Perfecto para diseños únicos que no podrás encontrar en ninguna otra parte (como, por ejemplo, el de tu logotipo). PANEL DE ACTIVIDAD
Una pestaña muy útil en la aplicación Streamer Companion que te permite saber quién ha activado qué efectos durante la retransmisión. Te será de gran ayuda para saber cuáles son los emoticonos y efectos de iluminación más populares y así cambiarlos por otros que no lo son. CONFIGURACIÓN DE LA APLICACIÓN
PASO 1: Conecta tu Razer Seiren Emote o Razer Kraken Kitty Edition e instala la aplicación PASO 2: Haz click en la pestaña Conexiones y sincronízala con el programa de streaming que quieras. Disponible para Twitch y Streamlabs; otros programas disponibles próximamente. PASO 3: ¡Comienza a personalizarlo todo! Haz click en la pestaña Alertas para programar los emoticonos y efectos de iluminación que se activarán o en Editor para comenzar a crear y cargar tus propios emoticonos. -
Razer Synapse
Razer Synapse 3, la herramienta de configuración de hardware unificada y basada en la nube que lleva tus dispositivos Razer al siguiente nivel.
Funciones De Macros Avanzadas
Utiliza potentes macros en tus juegos favoritos con Razer Synapse 3. Crea fácilmente una secuencia de pulsaciones de botones complejas para poder ejecutar combinaciones ganadoras con precisión en un solo click.
Razer Hypershift
Con solo pulsar un botón, se desbloquea temporalmente un segundo conjunto de funciones que se añade a tu asignación de botones actual. Así, se dobla de forma efectiva el número de botones personalizables de tu dispositivo.
Almacenamiento Híbrido Local Y En La Nube
Vuelve a vincular botones, asigna macros y guarda automáticamente todas las configuraciones de perfil en la nube. Además, puedes guardar hasta cuatro perfiles gracias al almacenamiento local.
Razer Chroma RGB
Convierte tu escritorio en un lienzo con los efectos de iluminación de Chroma Studio o crea los tuyos propios y sincroniza tus dispositivos, juegos y plataformas con Chroma Connect. Para vivir una experiencia totalmente inmersiva mientras juegas o escuchas música, activa Chroma Visualizer y deja que tome el control de tu iluminación.
Philips Hue
Razer Chroma y Philips Hue ahora ofrecen iluminación reactiva para tus juegos a través del módulo Philips Hue de Synapse. Ilumina tu habitación con los efectos de iluminación personalizables de Chroma Studio y observa cómo tus luces cobran vida.
Amazon Alexa
Otórgale el control total a tu voz con el módulo Amazon Alexa de Synapse. Gestiona perfiles de manera intuitiva, cambia los efectos de iluminación y dale órdenes a Alexa mientras juegas.
-
Razer THX Spatial Audio
Advanced 7.1 Surround sound with superior positional accuracy, for all your games.
What separates good sound from phenomenal audio is the ability to transport you right into the action. Whether it’s knowing the precise location of enemy gunfire or embracing the moment as you stand in the center of an arena, the THX Spatial Audio App delivers advanced 7.1 surround sound with pinpoint positional accuracy to make your game come alive.
THX Spatial Audio technology is an advanced positional audio solution that delivers a heightened, immersive experience as you game. Designed for pinpoint positional accuracy, here's how it benefits your gaming:
SUPERIOR POSITIONAL ACCURACY THX Spatial Audio lets you locate sneaking enemies, hear approaching footsteps and detect nearby threats before anyone else does. SURROUND SOUND CALIBRATION THX Spatial Audio allows you to adjust the distance, volume and position of speakers for a personalized positional audio experience. WORKS WITH MORE GAMES THX Spatial Audio immerses you in surround sound even from stereo sources, ensuring immersive audio with a wider selection of games. EQ CUSTOMIZATION Personalize your EQ settings for just the right balance of Highs, Mids and Lows, or up the ante by applying Bass Boost levels, Sound Normalization and Vocal Clarity. STAY FOCUSED LONGER THX Spatial Audio delivers such a natural listening experience, it can help to reduce ear and brain fatigue because you’re able to figure out where every sound is coming from instinctively. COMPATIBLITY WITH BLUETOOTH AND USB Works with a wide range of headsets, including 3.5mm, Bluetooth and USB. -
RMPrepUSB
Make your USB drive bootable by using RMPrepUSB.
Saving files is up to 10% faster if you first format your SD card or Flash drive using RMPrepUSB (FAT32).
RMPrepUSB is a user-friendly Windows graphical front-end which calls it's brother application RMPartUSB (which does all the hard work!).
RMPartUSB is a Windows command line utility and does not have a GUI and can be used in batch/script files (type RMPartUSB to see help/usage text in a Windows command console).
RMPartUSB makes a partition of any size and is primarily intended for USB Flash Drive (UFD) memory sticks, although it can be used on USB hard drives or USB card readers to create a bootable partition or even non-USB drives.
RMPartUSB also places boot code on the USB device for either XP/WinPEv1 (ntldr), Vista/WinPEv2/Win7 (bootmgr), MS-DOS (io.sys) or FreeDos (kernel.sys).
RMPartUSB does not place any files on the UFD - you must copy these over yourself or set the Copy OS Files option in RMPrepUSB to copy over the contents of a folder of your choice.
-
Romulus Rom Manager
ROM Manager developed by F0XHOUND.
Features
Romulus is able to import all kind of know DAT files like Clrmame pro OLD and XML format, Romcenter, Offlinelist, MESS softlists or import using a MAME based EXE. DAT files can be imported as Zip, Rar, 7z or uncompressed. Offlinelist DAT information loaded to able to automatic download images or update complete DAT if update is available, can be change the filename description params like Offlinelist original application. Multiple loaded profiles at same time displayied in tabs. Can Scan and Rebuild files from a selected directories and fix them, this process can be in Zip, Rar, 7z or uncompressed. If DAT information is available in scan or rebuild process can be in Split/Merged, Split/Non merged or Not Split filemode. Scan and Rebuild can be done in a batch automatic mode. Configure and run emulators added the correct params for the selected file. Reports of profiles or files information with a different options and formats to export ( HTML, DOC, TXT ). Statistics can be displayied to know the status of your files. Log information for important processes and save log option. Updater option to know changes and download Different languages to select ( Work in progress ), Many others.
< REQUIREMENTS >
Really Romulus can be runned in every computers with Windows XP, Vista, 7, 8, 8.1, 10 and probably in future Windows versions including 64bits releases. Some users tested Romulus using WINE (Windows interpreter for different OS), and reports works fine. Overall speed is different in computers with quick CPUs, more RAM memory or quick Hard Drives. Romulus was tested under different computers speed, and the result is... Minimum Requirements
INTEL or AMD Single Core Processor of 1Ghz RAM 2Gb HDD with some Mb free, but enought for Database that will be increasing when you add new DAT files. HDD formated in NTFS/ExFAT is required for more than 4Gb databases. Recommended Requirements
INTEL Core I5 or Ryzen5 2Ghz processor or higher RAM 8Gb SSD with some Mb free, but enought for Database that will be increasing when you add new DAT files. HDD formated in NTFS/ExFAT is required for more than 4Gb databases. Thx to
Translators : F0XHOUND, Kludge, SpaceAgeHero, Thallyrion, Kaito-Kito, Xiao, Caboteta, Squalo, Jangminsoo, Agus, xlmldh, Michip, Elijah067 Betatesters : SpaceAgeHero, Kaito Kito, Mr Ravik, Thallyrion, Grinderedge, Elfish, EmuLOAD, Maero, Xiao, xTMODx, Agus, ToniBC, RowlaxX -
Rufus
Rufus es una utilidad que le ayuda a formatear y crear soportes USB de arranque, como «pendrives», tarjetas de memoria, etcétera.
Es especialmente útil en casos donde:
necesite crear medios de instalación USB a partir de ISOs arrancables (Windows, Linux, UEFI, etc.) necesite trabajar en un equipo que no tenga un sistema operativo instalado necesite actualizar el firmware o BIOS de un ordenador desde DOS quiera ejecutar una utilidad de bajo nivel
Uso
Descargue el archivo ejecutable y ábralo; no es necesario instalarlo.
El ejecutable está firmado digitalmente, y la firma debería indicar: "Akeo Consulting"
Notas sobre la compatibilidad con DOS:
Si crea un disco de arranque DOS y utiliza un teclado no estadounidense, Rufus intentará seleccionar una disposición de teclado a partir de la configuración regional del sistema. En ese caso, se recomienda FreeDOS, que es la opción predeterminada, ya que admite más disposiciones de teclado.
Notas sobre la compatibilidad con ISO:
Todas las versiones de Rufus a partir de v1.1.0 permiten crear soportes USB de arranque a partir de una imagen ISO (.iso).
Es muy fácil crear una imagen ISO a partir de un disco físico o de un conjunto de archivos, con el uso de una aplicación de grabación de CD, como CDBurnerXP o ImgBurn.
by Pete Batard.
-
Rufus: The Reliable USB Formatting Utility
Rufus is a utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc.
It can be especially useful for cases where:
you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Features:
Format USB, flash card and virtual drives to FAT/FAT32/NTFS/UDF/exFAT/ReFS Create DOS bootable USB drives, using FreeDOS or MS-DOS (Windows 8.1 or earlier) Create BIOS or UEFI bootable drives, including UEFI bootable NTFS Create bootable drives from bootable ISOs (Windows, Linux, etc.) Create bootable drives from bootable disk images, including compressed ones Create Windows To Go drives Download official Microsoft Windows 8 or Windows 10 retail ISOs Compute MD5, SHA-1 and SHA-256 checksums of the selected image Twice as fast as Microsoft's USB/DVD tool or UNetbootin, on ISO -> USB creation (1) Perform bad blocks checks, including detection of "fake" flash drives Modern and familiar UI, with 39 languages natively supported Small footprint. No installation required. Portable 100% Free Software (GPL v3) by Pete Batard.
-
Screen Capturer Recorder
Este programa permite "grabar" tu escritorio, ¡o incluso transmitirlo!
Incluye algunas utilidades de ayuda para "grabar la captura de pantalla/transmitirla" y de configuración. También incluye un ayudante (virtual-audio-capturer) para grabar "lo que escuchas/ves en tu escritorio" para el sistema vista+.
Para poder utilizarlos, primero necesitarás tener instalado el JRE de Java en tu sistema. Instálalo desde java.com si no lo tienes instalado.
También incluye un filtro de captura de pantalla/escritorio directshow gratuito, de propósito general y de código abierto.
Puedes usar esto con cualquier programa (compatible con directshow) para capturar o transmitir, como VLC, etc.
Screen Capturer Recorder es una aplicación creada por rdp.
-
SD Memory Card Formatter for SD/SDHC/SDXC
The SD Memory Card Formatter formats SD Memory Card, SDHC Memory Card and SDXC Memory Card (respectively SD/SDHC/SDXC Cards) complying with the SD File System Specification created by the SD Association (SDA).
It is strongly recommended to use the SD Memory Card Formatter to format SD/SDHC/SDXC Cards rather than using formatting tools provided with individual operating systems. In general, formatting tools provided with operating systems can format various storage media including SD/SDHC/SDXC Cards, but it may not be optimized for SD/SDHC/SDXC Cards and it may result in lower performance.
SD/SDHC/SDXC Cards have a “Protected Area” for SD Card security purposes. The SD Memory Card Formatter does not format the protected area in the SD/SDHC/SDXC Cards. The protected area shall be formatted by an appropriate PC application or SD host devices that provide SD security function.
The SD Memory Card Formatter doesn't support SD/SDHC/SDXC Card encrypted by the “BitLocker To Go" functionality of Windows. Please format the SD/SDHC/SDXC Card after it has been unlocked.
Important Notice: Administrator Rights is required for Windows and Mac OS/macOS to execute SD Memory Card Formatter.
SD Interface Devices
The following interface devices can be used to access SD/SDHC/SDXC memory cards:
SD Card slot on PC USB SD Card reader for USB2.0, USB3.0, USB3.1 & USB-C Always confirm that the device is compatible with the SD, SDHC or SDXC memory card before formatting.
SD Memory Card Formatter for SD/SDHC/SDXC is avaible for Windows and macOS.
by Tuxera.
-
SignaPic Banner
SignaPic Banner is a simple tool to help you resize your image (JPG / BMP) to various size with interesting basic image features that developed only for SignaPic application series (DSi, YasUI, TWiT) :
Proportional Resizer : Redraw your image to any size by keeping aspect ratio and draw background for unfilled spaces (Auto Detect Color, Defined Color, Widecut Grayscale) Self defined profile : Create your own image size profile by just editing the ini file
by cimo95.
-
SimpleTV
An IPTV player that allows you to create and share playlists, view TV channels from around the world, record streams and play multimedia files.
FEATURES
Highly flexible and customizable interface (the ability to change channels with a single click, the ability to customize their hotkeys, etc.)
Ability to play and record rtmp streams (librtmp support)
PIP and PiP (Ctrl + P or menu > channels > Multi PiP)
Downloadable program guide and scheduling program guide
To edit the list of files in the channels/player (move, delete, etc)
Various ordering channels (establishment of groups, channels, name search, advanced filter)
Support for LUA scripts (download channels, channel address processing during playback, etc)
Search for multicast channels
Working with UDPPROXY
Record up to eight channels at the same time, scheduled recording, Time Shift is a shift in time, screenshots thread
Run in tray mode
Play video files simultaneously with the flow
Full support WinLirc
-
Sparkle
Secure and reliable software update framework for Cocoa developers.
Features
Seamless. There's no mention of Sparkle; your icons and app name are used. Secure. Updates are verified using EdDSA signatures and Apple Code Signing. Fast. Supports delta updates which only patch files that have changed. Easy to install. Sparkle requires no code in your app, and only needs static files on a web server. Supports bundles, preference panes, plugins, and other non-.app software. Can install .pkg files for more complicated products. Handles permissions, quarantine and automatically asks for authentication if needed. Uses RSS-based appcasts for release information. Appcasts are a de-facto standard supported by 3rd party update-tracking programs and websites. Stays hidden until second launch for better first impressions. Truly self-updating — the user can choose to automatically download and install all updates in the background. Ability to mark updates as critical. Progress and status notifications for the host app.
Requirements
Runtime: macOS 10.7 or greater Build: Xcode 9 and 10.11 SDK or greater HTTPS server for serving updates (see App Transport Security) No sandboxing. Sparkle 1.x can't update sandboxed apps. Sparkle 2.x can. by Sparkle Project.
-
SpeedOut
Do you have a Flash Stick? Yes, of course. Do you know, how fast it is? Will you be able to run program from within it, play a portable Call Of Duty or just quickly copy a film from/to it? You don't know.
When you are going to buy a USB Drive or Stick, you can see big amount of different vendors, and everywhere is label "The BEST". Who is the best? Kingston or Kingmax, PQi or SanDisk, Transcend or Canyon?
NOW YOU WILL HAVE AN ANSWER. No. Better. YOU WILL HAVE A WAY TO FIND THE BEST PRICE/QUALITY PRODUCT YOURSELF.
Presenting new utility SpeedOut.
About this program. Short FAQ.
It's really easy to use this application. Just one button 2 go. Anyway, lets get into deep and decide, why is my program better then many other. Well, SpeedOut is an application, created for calculating USB drive (stick or external HDD) read/write speed. It is using low-level technology, which allows you to know REAL drive speed, without slowdowns, caused by File System. After program start you can see simple interface:
By pressing Start, program will make four read and four write tests. After that you'll get result for reading and writing. DON'T TOUCH MOUSE AND KEYBOARD DURING THIS OPERATION! Also, you will get a mark for your drive, showing how fast is it.
As you can see, first graph is showing mark on Read Speed, second - on Write Speed. Here it is. The main thing, why program is better then another (like Everest HDD Bench or HDD Tune): no data will be destroyed while writing test is performed! No need to reformat your drive! Nothing more, just one click. Also, at system menu (Alt+Space) you will have two important functions - Save to file (just click enter - program will save file on drive that was checked) and Copy to clipboard (easy way to bounce in chat with your friends).
SpeedOut is fully portable - so you can take it with you wherever you want.
Question: I have a problem, many exe-files on my PC can not run. I double-click and nothing happens!!!
Answer: Probably, you have IndieVolume installed on your Windows. It is using invalid hook data - so, remove IndieVolume - and problem is decided.
Question: Your program is showing different resultsfor one stick. Why?
Answer: It depends on port and time, you were using USB. Just put off your flash, wait five mins and set on. I'll try to make results less different in next version.
Question: Is program working under User-mode.
Answer: Nope. Low-level is only allowed under administrator.
Possibilities and advantages:
Fully portable No need to reformat your drive Low-level technology Beautiful interface Easy to use - click2go No bugs as soon as you are not disasming it Short tests - realistic results. TOTALLY clean And, of course, free by Mbentefor.
-
Spotify Downloader
Downloads songs from YouTube in an MP3 format by using Spotify's HTTP link.
Can also download a song by entering its artist and song name (in case if you don't have the Spotify's HTTP link for some song).
Automatically applies metadata to the downloaded song which include:
Title Artist Album Album art Lyrics (if found on http://lyrics.wikia.com) Album artist Genre Track number Disc number Release date And more... Works straight out of the box and does not require to generate or mess with your API keys (already included).
That's how your music library will look like!
Installation
This tool works only with Python 3.
Python 2 compatibility was dropped because of the way it deals with unicode (2020 is coming soon too). If you still need to use Python 2 - check out the (outdated) python2 branch.
spotify-downloader works with all major distributions and even on low-powered devices such as a Raspberry Pi.
Check out the Installation wiki page for OS-specific instructions to get spotify-downloader working on your system.
Usage
For the most basic usage, downloading tracks is as easy as
$ python3 spotdl.py --song https://open.spotify.com/track/2DGa7iaidT5s0qnINlwMjJ $ python3 spotdl.py --song "ncs - spectre" For downloading playlist and albums, you need to first load all the tracks into text file and then pass this text file to --listargument. Here is how you would do it for a playlist
$ python3 spotdl.py --playlist https://open.spotify.com/user/nocopyrightsounds/playlist/7sZbq8QGyMnhKPcLJvCUFD INFO: Writing 62 tracks to ncs-releases.txt $ python3 spotdl.py --list ncs-releases.txt Run python3 spotdl.py --help to get a list of all available options in spotify-downloader.
Check out the Available options wiki page for the list of currently available options with their description.
The wiki page Instructions for Downloading Songs contains detailed information about different available ways to download tracks.
FAQ
How to specify a custom folder where tracks should be downloaded? Check out our FAQ wiki page for more info.
Contributing
Check out CONTRIBUTING.md for more info.
Running Tests
$ python3 -m pytest test Obviously this requires the pytest module to be installed.
Disclaimer
Downloading copyright songs may be illegal in your country. This tool is for educational purposes only and was created only to show how Spotify's API can be exploited to download music from YouTube. Please support the artists by buying their music.
-
Spotify Playlist Downloader
## IMPORTANT NOTICE THE TOOL IS NOT WORKING. DOWNLOADING IT WOULD BE USELESS. WORKING ON A UPDATE.
## 12/MAY Still working on the update.... sorry.
Download an entire spotify playlist (160kbps mp3's) to your local machine with a simple interface
When it starts downloading it checks if you already downloaded the song if so it skips it.
When done downloading it also writes the ID3 data and album art to the file.
###To install:
Install nodejs (USE INSTALLER!! Install 64bit if you're on a 64bit system!!!) if you haven't already. ([NodeJS Downloads](https://nodejs.org/en/download/))
Microsoft .NET Framework 4.6 if you haven't already. ([Download](https://www.microsoft.com/en-US/download/details.aspx?id=48130))
Then download this repository ([HERE](https://github.com/dekiller82/spotify-playlist-downloader-with-windows-gui/archive/master.zip)) or use the button on github.
Unpack the repository and run the .exe (source code can be found [here]( https://github.com/dekiller82/Spotify-Playlist-Downloader-GUI))
###First Time Setup (Only needs to be done right after downloading)
**I recommend using a brand new Spotify Account for this tool!**
Log In using your Spotify Username and Password.
You can't login with Facebook accounts so you will have to create a new Spotify user to login.
The tool will check for the node_modules folder on startup. If it's not there it will take care of the npm install.
Changelog
#####V2.0
**RELAUNCH! IF YOU ALREADY HAVE V1.2 OR BELOW FULLY REINSTALL THIS REPOSITORY**
New UI
Bugfix for Usernames with a dot in their name
New Log in screen
Password will be wiped on log out only
#####V1.2
**IF YOU ALREADY HAVE V1.1.6 OR BELOW PLEASE FULLY REINSTALL THIS REPOSITORY**
Tool now also downloads album art and attaches it.
You can now download up to 5 playlists in 1 go
Instead of opening a new prompt for downloading output is now in the program
#####V1.1.6
Bugfix for underscores in usernames
#####V1.1.5
Added security feature to wipe password after download.
#####V1.1
You can now download up to 3 playlists in 1 go
#####V1.0.6
NodeJS launch bugfix
#####V1.0.5
Added option for /Artist/Album file structure
#####V1.0.1
Updated default download folder to the Windows Music folder.
Updated Layout
#####V1
Initial Release
###TO-DO
Add option to set download folder (For now songs will be saved to: C:\Users\youruser\Music)
~~Add option to download multiple playlists~~ DONE! Since V1.1
~~Add option to download all mp3's to a single folder~~ DONE! Since V1.0.5 with the Artist/Album option
###Additional Comments
If you get any errors please go to "C:\Program Files\nodejs" and see if node.exe and npm.cmd are installed there
To download Albums for now the only way to do it is to add the songs to a playlist and then download that playlist.
Free Accounts get limited after a while though, but starts downloading again afterwards
You can't login with Facebook accounts so you will have to create a new Spotify user to login.
#####Thanks to /u/dva010/
If you are trying to download an artist that has a '.' at the end of their name, it will create a folder that Windows will not allow you to delete without running a command in cmd.
Pasted command below on how to remove the folder if you guys run into this issue.
Command to delete folder that ends in '.'
rd /s "\?\C:\Documents and Settings\User\Desktop\Annoying Folder."
### Disclaimer:
- This was done purely as an academic exercise.
- This my first coding project so code is sloppy en ugly
- I do not recommend you doing this illegally or against Spotify's terms of service.
-
Spotydl
Aplicación que permite descargar canciones desde Spotify, con versión para Windows y Mac.
-
SUPO: Super UPack Optimizer
SUPO is another GUI for UPack, a CLI EXE Packer by DWings with these features :
Multiple file processing Installable (Menu -> Install me) for right-click menu usage Advanced Mode (Experimental) for sampling using auto generated LC and FB
by cimo95.
-
ThisIsWin11
ThisIsWin11 nos permite personalizar Windows 11 todo en un solo lugar. Se expande lentamente como un práctico todoterreno para Windows 11 reemplazando algunos componentes PowerToys descontinuados y añadiendo otros adicionales.
Componentes incluidos
GetStarted ThisIsWin11 comienza con una útil introducción a lo que puedes encontrar en Windows 11. Este componente amplía la aplicación Get Started de Microsoft. OpenTweaks le permite personalizar los ajustes más oscuros de la interfaz de usuario del sistema Windows 11. Sustituye a Microsoft PowerToys TweakUI (disponible desde Windows 95 - Windows XP) que dejó de integrarse en el relanzamiento de PowerToys a partir de Windows 10. PumpedApp permite eliminar funciones y aplicaciones no deseadas de Windows 11, como las aplicaciones Cámara y Alarma, y otros elementos innecesarios preinstalados. Paquetes con el Administrador de paquetes de Windows le permite crear sus propios paquetes de instalación personalizados. PowerUI permite aplicar funciones de automatización basadas en PowerShell y en scripts de la comunidad. Extensiones le permite crear ajustes personalizados SÓLO Windows 11 (NO utilice esta aplicación en Windows 10) ThisIsWin11 es una aplicación creada por Bel.
-
tiny11
Basado en Windows 11 Pro 22H2, tiny11 tiene todo lo que necesitas para una experiencia informática cómoda sin la hinchazón y el desorden de una instalación estándar de Windows.
Solo utiliza unos 8 GB de espacio, frente a los más de 20 GB de una instalación estándar. Puedes actualizar desde Windows 10 e instalarlo en dispositivos no compatibles.
tiny11 ha sido creado por NTDEV.
-
toolame
TooLAME is an optimized MPEG Audio Layer 2 encoder.
*********************
INTRODUCTION
*********************
tooLAME is an optimized Mpeg Audio 1/2 Layer 2 encoder. It is based heavily on
- the ISO dist10 code
- improvement to algorithms as part of the LAME project (www.sulaco.org/mp3)
- work by myself and other contributors (see CONTRIBUTORS)
*********************
INSTALLATION
*********************
1. edit Makefile
at least change the architecture type (ARCH) to suit your machine.
2. 'make'
*********************
USAGE
*********************
./toolame [options] <input> <output>
Input File
tooLAME parses AIFF and WAV files for file info
raw PCM is assumed if no header is found
for stdin use a -
Output File
file is automatically renamed from *.* to *.mp2
for stdout use a -
Input Options
-s [int]
if inputting raw PCM sound, you must specify the sample rate
default sample rate is 44.1khz.
-a
downmix from stereo to mono
if the incoming file is stereo, combine the audio into
a single channel
-x
force byte-swapping of the input. (current endian detection is dodgy,
so if toolame produces only noise, use -x )
-g
swap the LR channels of a stereo file
Output Options
-m [char]
the encoding mode (default 'j')
's' stereo
'd' dual channel
'j' joint stereo
'm' mono
-p [int]
which psy model to use (default '1')
Different models for the psychoacoustics
Models: -1 to 4
-b [int]
the total bitrate
For 48/44.1/32kHz default = 192
For 24/22.05/16kHz default = 96
-v [int]
Switch on VBR mode.
The higher the number the better the quality.
Useful range -10 to 10.
See README.VBR for details.
Operation
-f
fast mode turns off calculation of the psychoacoustic model.
Instead a set of default values are assumed
-q [int]
quick mode calculates the psy model every 'num' frames.
Misc
-d emp
de-emphasis (default 'n')
-c
mark as copyright
-o
mark as original
-e
add error protection
-r
force padding bits off
-D
add DAB extensions
-t [int]
'talkativity' setting. 0 = no message. 3 = too much information
*********************
EXAMPLES
*********************
1.
toolame sound.wav
This will encode sound.wav to sound.mp2 using the default bitrate of 192 kbps
and using the default psychoacoustic model (model 1)
2.
toolame -p 2 -v 5 sound.wav newfile.mp2
Encode sound.wav to newfile.mp2 using psychoacoustic model 2 and encoding
with variable bitrate. The high value of the "-v" argument means that
the encoding will tend to favour higher bitrates.
3.
toolame -p 2 -v -5 sound.wav newfile.mp2
Same as example above, except that the negative value of the "-v" argument
means that the lower bitrates will be favoured over the higher ones.
4.
cat sound.pcm | toolame -s 22050 -f -b 96 - newfile.mp2
Toolame is encoding from stdin at a bitrate of 96kbps and is using the
'fast' mode which means that no psychoacoustic modelling is done.The
input file is raw pcm so the sample rate needs to be specified (22050Hz)
*********************
CONTRIBUTORS
*********************
Dist10 code writers
LAME specific contributions
fht routines from Ron Mayer <mayer at acuson.com>
fht tweaking by Mathew Hendry <math at vissci.com>
window_subband & filter_subband from LAME circa v3.30
(multiple LAME authors)
(before Takehiro's window/filter/mdct combination)
Oliver Lietz <lietz at nanocosmos.de>
Tables now included in the exe! (yay! :)
Patrick de Smet <pds at telin.rug.ac.be>
scale_factor calc speedup.
subband_quantization speedup
Federico Grau <grauf at rfa.org>
Bill Eldridge <bill at hk.rfa.org>
option for "no padding"
Nick Burch <gagravarr at SoftHome.net>
WAV file reading
os/2 Makefile mods.
Phillipe Jouguet <philippe.jouguet at vdldiffusion.com>
DAB extensions
spelling, LSF using psyII, WAVE reading
Henrik Herranen - leopold at vlsi.fi
(WAVE reading)
Andreas Neukoetter - anti at webhome.de
(verbosity patch '-t' switch for transcode plugin)
Sami Sallinen - sami.sallinen at g-cluster.com
(filter_subband loop unroll
psycho_i fix for "% 1408" calcs)
Mike Cheng <mikecheng at NOT planckenergy.com> (remove the NOT)
Most of the rest
*********************
REFERENCE PAPERS
*********************
(Specifically LayerII Papers)
Kumar, M & Zubair, M., A high performance software implementation of mpeg audio
encoder, 1996, ICASSP Conf Proceedings (I think)
Fischer, K.A., Calculation of the psychoacoustic simultaneous masked threshold
based on MPEG/Audio Encoder Model One, ICSI Technical Report, 1997
ftp://ftp.icsi.berkeley.edu/pub/real/kyrill/PsychoMpegOne.tar.Z
Hyen-O et al, New Implementation techniques of a real-time mpeg-2 audio encoding
system. p2287, ICASSP 99.
Imai, T., et al, MPEG-1 Audio real-time encoding system, IEEE Trans on Consumer
Electronics, v44, n3 1998. p888
Teh, D., et al, Efficient bit allocation algorithm for ISO/MPEG audio encoder,
Electronics Letters, v34, n8, p721
Murphy, C & Anandakumar, K, Real-time MPEG-1 audio coding and decoding on a DSP
Chip, IEEE Trans on Consumer Electronics, v43, n1, 1997 p40
Hans, M & Bhaskaran, V., A compliant MPEG-1 layer II audio decoder with 16-B
arithmetic operations, IEEE Signal Proc Letters v4 n5 1997 p121
[mikecheng at NOT planckenergy.com] remove the NOT
-
TorrentTV
Stream Torrents to your AppleTV, Roku or Chromecast.
Play right away
Files get downloaded from the start so you can start watching the movie in just a couple of minutes. Drag and Drop
Drop Magnet Links or Torrents into the box, as well as any other local Torrent file. Local Files
If you already have the movie in your Hard Drive, drop it in the box and will also be sent to your Chromecast or AppleTV via AirPlay.