Ir a contenido




Suscríbete!



No te pierdas nada a la vez que nos apoyas desde las redes sociales.

Últimos comentarios


Información del archivo

  • Añadido el: Dec 10 2010 18:28
  • Actualizado el: Dec 10 2010 18:28
  • Tamaño: 130.99K
  • Visitas: 2122
  • Descargas: 412

Descargar EclipPS3 Firmware 1.4






DOWNGRADING GUIDE

Note: When downgrading you may in some cases loose saved data on the PS3 HDD.


Flashing Eclipse
================

Flash your Eclipse as you normally would.
After you have completed the downgrading procedure as described below you must reflash your Eclipse with the standard firmware.


DOWNGRADING PROCEDURE
=====================

- Prepare a blank USB memory stick with only 2 files inside: Lv2Diag.self (file 1) and the modified 3.41 PUP file.
These must be in the root of the memory stick. No other file must be present.
- Insert the Eclips3 with the downgrade firmware in your console.
- Turn on the PS3 using the standard sequence; Remove power (or power plug) from the PS3,insert Eclips3 into USB port, power on, then quickly press eject.
After a very short while the PS3 will power off.
- Turn on the PS3 to confirm that it is in Service Mode. You should see a red box on the screen saying Factory Service Mode.
(If you are using a component cable the image might be garbled). Turn off the PS3 and remove Eclips3.
- Insert the USB memory stick with the 2 files on in the "right USB port" of the PS3 and turn it on.
The screen will be black, but the LED on the PS3 will blink.
- Wait for approximately 3 minutes. In the end the PS3 power button will flash green and then the PS3 will turn off.
Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
- Remove the USB memory stick and turn on the PS3. It will still be in service mode. you can now verify that it has been downgraded to v3.41. If you wish
to downgrade to an earlier firmware you can do so now, there is no need to use modified custom PUP when the firmware has already been downgraded to 3.41.
- Insert USB drive in PC, delete the 2 files, and copy LV2Diag.self (file 2) to it.
- Insert USB memory stick and power on the PS3. After approximately 10 seconds it will power off.
- Remove the USB memory stick and power on the PS3. The procedure is now complete.

Have fun!


comments powered by Disqus



  • 1976 Archivos totales
  • 23 Categorías totales
  • 4 Total de usuarios que han subido archivos
  • 3911325 Total de descargas
  • CFW Ferrox CEX 4.82 Último archivo
  • Dekuwa Latest Submitter