Ir a contenido




Suscríbete!



No te pierdas nada a la vez que nos apoyas desde las redes sociales.

Últimos comentarios


Información del archivo

  • Añadido el: Oct 23 2012 01:16
  • Actualizado el: Oct 27 2012 13:29
  • Tamaño: 191.72MB
  • Visitas: 3438
  • Descargas: 844

Descargar Rogero CFW 4.21 v1.09d






v1.09 Details and Changes
- Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
- XMB Icons problem from in-game PS button is now fixed.
- Loading games from App_home Icon is now fixed.
- Many other fixes from version 1.00 for a better performance and added stability.
- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
- It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.


ATTENTION: 

1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
** A Hardware Flasher alone without a valid dump cannot fix your bricked PS3 **

3- The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg

4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

6- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.

7- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.

8- You need to already be on 3.55 to install this. Installing from any firmware other than 3.55 will simply not work



- Downgrading back to 3.55 is always possible using the following steps :
- Download the 4.25 downgrader PUP ---> 4.25 Downgrader       mirror ---> 4.25 Downgrader 
   Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW.
- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21

Useful Hint: you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0



- Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps :
1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )
---- Downgrade back to ver3.55 using the guide above.
---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09

2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 )
---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first.
---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )


- Changing/Upgrading the HDD while on Rogero CFW4.21 should be done using the following steps :
- Download the 4.25 downgrader PUP ---> 4.25 Downgrader     mirror ---> 4.25 Downgrader 
  Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- Swap the current HDD with the New HDD, Turn the PS3 on, follow screen instructions and let it install the 4.25 downgrader CFW.
- After the downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any OFW/CFW 3.55 or a newer CFW 4.21

Useful Hint: you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0


Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information.
Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.




comments powered by Disqus



  • 1976 Archivos totales
  • 23 Categorías totales
  • 4 Total de usuarios que han subido archivos
  • 3911163 Total de descargas
  • CFW Ferrox CEX 4.82 Último archivo
  • Dekuwa Latest Submitter