Jump to content


RetroArch for Switch 1.7.6


¿Quieres enterarte al momento de las nuevas descargas? Síguenos en Twitter o Mastodon!

RetroArch is a frontend for emulators, game engines and media players.

It enables you to run classic games on a wide range of computers and consoles through its slick graphical interface. Settings are also unified so configuration is done once and for all.

RetroArch has advanced features like shaders, netplay, rewinding, next-frame response times, and more!

Installation instructions

You will need a Nintendo Switch capable of running homebrew for this to work.

  1. Download the RetroArch 7z file for Switch.
  2. Extract its contents and just drag and drop retroarch and the switch folder onto the root of the SD card.
  3. Open Hbmenu, and start RetroArch.

IMPORTANT: Please start RetroArch Switch with a fresh install (in case you already had RetroNX installed before)
and migrate savegames from /retroarch/cores/save{files, states} to the same folder on the new installation.

Features

    • OpenGL support
      • Thanks to Mesa/Nouveau support, this Switch version comes with full-blown OpenGL support (thanks to fincsdev). This means that all of the advanced features available on the PC should be available on Switch as well! GLSL shaders should be supported, overlays are supported, and thanks to OpenGL support, we can use hardware-accelerated menus such as XMB/MaterialUI (with full thumbnail support, theming, etc). In addition to all this, it allows us to port libretro cores that require the use of OpenGL later in the future, such as Parallel N64, OpenLara, and potentially more like Reicast/PPSSPP/etc!
    • Touchscreen support (for MaterialUI/etc)
      • natinusala saw to it that this initial version received touchscreen support. Right now the DPI (Dots Per Inch) is kinda hardcoded for portable and not really meant for dock mode. This will be improved in the near future.
    • Full networking support.
      • Online multiplayer (with peer-to-peer and MITM matchmaking) should be available from Day One. Take note that performance of the core heavily matters in terms of the kind of quality you get out of your online experience, since the netplay implementation is rollback-based. Aside from multiplayer, you can also download cores, update assets, and all the features you would expect on the PC version.
    • RetroAchievements support
      • By registering an account at Retro Achievements and inputting your account details into RetroArch, you can obtain achievements for your games.
    • Game scanning
      • Scanning of your games should fully work, except for perhaps PS1 images right now.
    • Split Joy-Con support
      • If you go to Settings -> Input and enable Split Joy-Con (1 to 8), you can use a full Joy-Con as two separate controllers!
    • Core downloader
      • From Day One, it should be possible to download and update new cores as they arrive on a daily basis without even having to wait for the next RetroArch stable!
    • Runahead support
      • RetroArch Switch comes with runahead support from Day One! This is our game-changing feature that allows you to beat latency and even go beyond the fast response times of the original hardware. Performance of this feature is heavily dependent on the ‘performance’ level of the core and the Switch’s relative power. Try experimenting with cores, and don’t forget to turn it of for more demanding cores that balk under the pressure. Because RetroArch offers such a wide array of cores even for the same system, it’s entirely possible that one specific SNES or Genesis core is fast enough for the kind of runahead at x frames configuration that you are looking for.

44 Cores at Launch!


This might just be the single biggest platform release at launch for a new platform ever for RetroArch! Right from day one, we are starting out of the gates on the Switch with over 44 libretro cores!

So let us quickly go over them one by one –

      • 4DO – 3DO Libretro core. Try to enable the core option Threaded DSP (or a setting named something similar) for better performance.
      • 2048 – A homebrew recreation of the 2048 puzzle game.
      • Cannonball – An OutRun game engine recreation. Requires the original arcade ROMs in order to work.
      • CrocoDS – An Amstrad CPC 6128 emulator.
      • DOSBOX – MS-DOS/Windows 9x emulator. Performance may vary according to which game you are attempting to emulate.
      • Final Burn Alpha – Arcade game emulator. Can emulate (among other examples) Capcom CPS1/CPS2/CPS3 games, Neo Geo, as well as other popular 80s/90s arcade systems.
      • FCEUmm – Nintendo Famicom/NES emulator. Has some nice core options as well as good performance.
      • fMSX – MSX emulator.
      • FreeINTV – Intellivision emulator.
      • Gambatte – Nintendo Game Boy/Game Boy Color emulator. Should be the fastest Game Boy core of all right now, as well as pretty accurate.
      • Gearboy – Nintendo Game Boy/Game Boy Color emulator. Libretro core generously maintained and supported upstream by DrHelius, its original author.
      • Gearsystem – Sega Master System/Game Gear emulator. Libretro core generously maintained and supported upstream byDrHelius, its original author.
      • Genesis Plus GX – Sega Master System/Game Gear/Genesis/Mega Drive emulator. Should be more accurate than Picodrive and is many’s go-to Genesis/Mega Drive emulator. Libretro core maintained upstream by Eke-Eke.
      • Handy – Atari Lynx emulator.
      • MAME 2000 – Arcade emulator based on a 2000 snapshot version of MAME (version 0.36b). Is functionally similar/identical to iMAME4All.
      • MAME 2003 – Arcade emulator based on a 2003 snapshot version of MAME (version 0.78). Is functionally similar/identical to MAME 0.72, except a bit more up-to-date and with some game-specific fixes implemented (as well as a speedup core option for Midway DCS games, such as the Mortal Kombat series).
      • MAME 2003 Plus – Arcade emulator based on a 2003 snapshot version of MAME (version 0.78). Has everything MAME 2003 has, plus more backported game drivers and features.
      • Mednafen NGP – SNK Neo Geo Pocket (Color) emulator.
      • Mednafen PCE Fast – NEC PC Engine (CD) emulator.
      • Mednafen Super-Grafx – NEC Super-Grafx (CD) emulator. Short-lived successor to the PC Engine with backward compatibility.
      • Mednafen VB – Nintendo Virtual Boy emulator.
      • Mednafen WonderSwan – Bandai WonderSwan/WonderSwan Color emulator. This portable handheld had a screen that ran at 75Hz, therefore V-Sync is disabled for this core.
      • mGBA – Nintendo Game Boy Advance emulator. Actively maintained and improved by endrift.
      • NEStopia – Nintendo Famicom/NES emulator known for its accuracy focus. Has plenty of features. Use NstDatabase.xml for additional game compatibility support. Libretro core maintained upstream by NEStopia Undead authors.
      • NX Engine – Cave Story game engine recreation. use the original Cave Story/Doukutsu Monogatari in order for this to work. These files are needed here.
      • O2EM – Magnavox Odyssey 2 emulator.
      • PCSX ReARMed – Sony PlayStation 1 emulator. Comes with an updated Unai video renderer for better performance. Hints: you will want to turn on threaded video for this core for better performance. You can use the PSP PS1 BIOS for better performance.
      • Picodive – Sega Genesis/Mega Drive emulator with 32X peripheral support. There is no Aarch64 dynarec so the dynarec for 32X might still be too slow.
      • PocketCDG – Karaoke MP3 music player.
      • PokeMini – Pokemon Mini emulator.
      • PrBoom – Doom game engine source port. Can run at fixed framerates like 35/40/50/60fps.
      • ProSystem – Atari 7800 emulator.
      • QuickNES – Nintendo Famicom/NES emulator. Fastest NES emulator out of them all.
      • Reminiscence – Flashback game engine recreation.
      • SNES9x 2010 – Super Famicom/Nintendo emulator. Should be considerably faster than Snes9x mainline.
      • SNES9x – Super Famicom/Nintendo emulator. Slower than Snes9x 2010 but has MSU-1 support among other improvements only available in upstream version. Maintained upstream by the original Snes9x devs like bearoso and OV2.
      • Stella – Atari 2600 emulator.
      • TGB Dual – Nintendo Game Boy / Game Boy Color emulator. Has a splitscreen multiplayer mode where gamepad 1 and 2 can play against each other successfully.
      • Tyrquake – Quake 1 game engine. Runs in software renderer, no networking support (yet).
      • VBA Next – Game Boy Advance emulator. Should have an option to multithread rendering which could potentially improve performance a lot.
      • Vecx – Vectrex emulator. Early ’80s game console that rendered everything with wireframe polygons.
      • VICE (x64) – Commodore 64 emulator.
      • XRick – Game engine recreation/port of Rick Dangerous.
      • Yabause – Sega Saturn emulator. Might be too slow for now.

Hints

      • In case PCSX ReARMed is running too slowly, go to Settings -> Video and enable Threaded Video. Threaded Video can also help with certain demanding shaders. Please note that Threaded Video can tend to introduce some judder to frame pacing which isn’t there with non-threaded video, so for all other cores you might want to leave this off.
      • There is a fallback ‘switch’ video driver that you can switch to from OpenGL in case you experience some issue with a core using OpenGL. In case you do, please make sure to set the Menu Driver to ‘rgui’ then, since the ‘switch’ video driver doesn’t have working XMB/MaterialUI menu support. If you fail to do this, you would just get a black screen at startup and you would have to remove your retroarch.cfg config.

Future plans

m4xw already has a Parallel N64 core up and running on the Switch, however it’s currently quite slow and we really want to await the completion of this bounty (which amassed an impressive $1K in less than 6 days BTW!) before we include it.

Beyond that, there is a new menu driver being developed called ‘ozone’ which looks highly promising, and you might see this becoming the default UI for the Switch port in the near future!


Que novedades incluye la versión 1.7.6

Released

  • Fixed audio(Be warned!)
  • In-app settings
  • Fix crash when re-opening after exiting game
  • Upstream citra

No te pierdas nada, síguenos en Twitter o Mastodon!
¿Tienes alguna duda, petición o aporte? Utiliza el foro!

×
×
  • Crear nuevo...