Ir a contenido




Suscríbete!



No te pierdas nada a la vez que nos apoyas desde las redes sociales.

Últimos comentarios


Información del archivo

  • Añadido el: Jul 04 2012 12:16
  • Actualizado el: Jul 04 2012 12:16
  • Tamaño: 5.4MB
  • Visitas: 775
  • Descargas: 292

Descargar JB-King 2.3 - 2.71 FW package






---------------------------------------------------
JB-King 2.3 - 2.71 FW package [ by CaptainCPS-X ]
updated: 7-1-2012
===================================================

------------------------
Introduction
========================

Recently I created a post where I shared my discovery about the fact that you can actually use the PB2 firmware files (DFU) with JB-King dongle, since they are basically the same thing. If you want to learn more visit this article at psx-scene.com:

http://psx-scene.com...ng-dongle-2389/


------------------------
About this package
========================

This package was made in hopes of helping users that are having problems updating / flashing their JB-King dongle with the latest PB2 v1.02 FW files (2.71)

The main difference of this package with others, is that this one includes a different Flashing Utility, this one was obtained from STMicroelectronics official software suite. It presents more advanced user options than the one provided by JB-King / PB2.

Files have been renamed and organized for better understanding of the flashing process as well.

Note: You must install the JB-King / PB2 dongle drivers for Windows x86 / x64 (included) before proceding.


-----------------------------------
Flashing 2.3 -> 2.7 FW to JB-King
===================================

To ensure the flashing process of 2.7, first we must make a recovery flashing of FW 2.3.

The flashing consist of 2 phases, because we must flash 2 different targets on the dongle.

NOTE: When removing the dongle from the PC, don't use the Windows "Safely remove hardware" just disconnect the dongle after you finish the flashing process.


PHASE 1 (2.3)

1- While pressing the upgrade button on your JB-King dongle, connect it to your PC.
2- Wait until the device is properly detected
3- Run the included Flashing Utility "DfuSeDemo.exe"
4- In the "Upgrade or Verify Action" section click on "Choose..."
5- Select the included "2.3_Target_01.dfu", on the side box it should say "Target in file... 01 ST"
6- Now in the "Action" list box displayng the available device targets, select the "01"
7- Select the "Optimize upgrade duration (Remove some FFs)" checkbox
8- Press "Upgrade" and wait for the process to complete


PHASE 2 (2.3)

1- After PHASE 1 is done, don't close the Flashing utility
2- In the "upgrade or Verify Action" section click on "Choose..."
3- Select the included "2.3_Target_00.dfu", on the side box it should say "Target in file... 00 ST"
4- Now in the "Action" list box displaying the available device targets, select the "00"
5- Press "Upgrade" and wait for the process to complete
6- You can now remove the dongle so we can get ready for the final upgrading


We are now ready to flash the latest FW 2.71 to JB-King, follow this procedure:


PHASE 1 (2.7)

1- While pressing the upgrade button on your JB-King dongle, connect it to your PC.
2- Wait until the device is properly detected
3- Run the included Flashing Utility "DfuSeDemo.exe"
4- In the "Upgrade or Verify Action" section click on "Choose..."
5- Select the included "2.7_Target_01.dfu", on the side box it should say "Target in file... 01 ST"
6- Now in the "Action" list box displayng the available device targets, select the "01"
7- Select the "Optimize upgrade duration (Remove some FFs)" checkbox
8- Press "Upgrade" and wait for the process to complete


PHASE 2 (2.71)

1- After PHASE 1 is done, don't close the Flashing utility
2- In the "upgrade or Verify Action" section click on "Choose..."
3- Select the included "2.71_Target_00.dfu", on the side box it should say "Target in file... 00 ST"
4- Now in the "Action" list box displaying the available device targets, select the "00"
5- Press "Upgrade" and wait for the process to complete
6- You can now remove the dongle


--------------------------------
Finish
================================

To verify that the process completed successfully, connect the JB-King dongle to your PS3 and after the booting process finish, go to "System Settings - > System Information".

It should now say "Firmware 4.11, True Blue 2.7"

If it doesn't say it, don't panic try to flash the dongle again.




comments powered by Disqus