Ir a contenido




Suscríbete!



No te pierdas nada a la vez que nos apoyas desde las redes sociales.

Últimos comentarios


Información del archivo

  • Añadido el: Jul 01 2012 15:22
  • Actualizado el: Jul 01 2012 15:22
  • Tamaño: 342.85MB
  • Visitas: 2931
  • Descargas: 2412

Descargar Kmeaw CFW 3.55






 

THE ***!!BLANDYMAN!!*** PRESENTS:
 
 
KMEAW CUSTOM FIRMWARE 3.55
 
--IMPORTANT!! PLEASE READ!!--
 
This custom firmware IS NOT SUPPORTED on PS3 models with a 256MB NAND flash chip (these are mostly the initial launch-window PS3s).
 
UNSUPPORTED SKU'S:
CECHA
CECHB
CECHC
CECHD
CHEHE
CHEHG
 
*Any other PS3s, and ALL Slims, should work without a problem.*
 
 
--NOTES ON THIS CUSTOM FIRMWARE--
 
This custom firmware is based on the combined works of geohot, waninkoko, flukes1, wutangrza, and several others. Individuals, such as wutangrza, have stated this is the CFW of choice, and the PS3 mod scene should focus on using this one as the primary CFW. Given the features and ease-of-installation, it is definitely the best one.
 
The important feature shared with other CFWs is the inclusion of peek/poke functionality - what is DIFFERENT, is the ability to run unsigned homebrew, the first 3.55 CFW of its kind.
 
 
--INCLUDED IN THIS PACKAGE--
 
Original Firmware 3.55 (located in "/OFW/")
Custom Firmware 3.55 ready-to-install (located in "/CFW/")
LV2.pkg, the pkg that MUST BE INSTALLED to patch RAM to allow lv2 syscalls required by backup managers (located in "/pkg/")
MultiMan v1.12.05 for 3.55 (located in "/pkg/")
 
 
--HOW TO INSTALL CUSTOM FIRMWARE--
 
*This section is about how to install the custom firmware. Once it is installed, you can follow the steps below ('Preparing your backup manager') to play backups on your PS3.
 
1. Check your PS3's version number. If you have ANY version below 3.55, go to step 2.
1a. IF YOU HAVE GEOHOT/WANINKOKO ALREADY INSTALLED, RESTORE THE OFFICIAL FIRMWARE 3.55, then proceed to step 3.
1b. If you already have 3.55, continue to step 3.
 
2. You can use the included update file to get your PS3 to system version 3.55. To do so:
-Access the folder "OFW".
-Copy the subfolder "PS3" (which contains subfolder "UPDATE" with the file "PS3UPDAT.PUP") onto the root of your USB drive.
-Double check by opening your USB drive through My Computer and you should immediately see a folder titled "PS3" with appropriate subfolders if you copied it correctly.
-Insert the USB drive into the PS3, go to Settings, then System Update, and choose Via Storage Media. It should automatically load the update from your USB drive. Follow the steps and complete the installation.
-Once complete, remove the USB drive and put it back in the PC.
 
3. Now we will install the custom firmware!
-Delete the folder "PS3" on the root of your USB drive.
-In this download, open the folder titled "CFW" and copy the "PS3" folder to the root of your USB drive.
-Repeat the steps from Step 2 to ensure the files copied over correctly.
-Insert the USB drive into the PS3, go to Settings, then System Update, and choose Via Storage Media. It should automatically load the update from your USB drive. Follow the steps and complete the installation.
-Once complete, congratulations! You're on Kmeaw's CFW 3.55 and have peek/poke access and can install unsigned pkgs.
 
 
--PREPARING YOUR BACKUP MANAGER--
 
*If you do not plan on playing backups (ripped copies of PS3 games, played from either the internal hard drive or external drives) then this step is not necessary.*
 
1.Installing PKGs.
-In this download, open the folder "pkg" and copy "lv2.pkg" and "multiMAN.pkg" to the root of your USB drive.
-Plug the USB drive into your PS3, go to the "Game" tab on the XMB, and execute "Install Package Files". This will automatically scan your USB drive and show the packages that can be installed. **IF YOU'RE SURE THE FILES ARE ON THE ROOT OF THE USB, BUT THEY FAIL TO APPEAR ON YOUR PS3, TRY A DIFFERENT USB SLOT AND RE-EXECUTE 'INSTALL PACKAGE FILES'**
-Install both packages, order does NOT matter.
-Once you've installed both, continue to step 2.
 
2.You need to run the app "lv2 patcher" now found under the "Game" tab. This must be done BEFORE you run your backup manager, otherwise your backups will NOT load. Once you run the lv2 patcher, you only need to repeat this step IF THE PS3 IS REBOOTED. As long as the PS3 is not powered down (going in and out of games is fine, but shutting down the system is not) you do not need to run the lv2 patcher again! **IF YOU DO RUN IT AGAIN, NOTHING WILL HAPPEN. IT IS PERFECTLY SAFE, BUT YOU DON'T NEED TO WASTE YOUR TIME**
 
 
--CONCLUSION--
 
You're done!! Your PS3 is not only ready to play homebrew, but also your backups, and can even access PSN!! (Well, until Sony updates 3.55 to something else...)
 
Have fun!
 
 
--CREDITS--
 
Many different people were involved in making this possible. Of the people I can remember, I'd like to thank Kmeaw, the creator of this latest firmware; flukes1 for his original contribution in allowing peek/poke on 3.55; wutangrza for the lv1/lv2 data used by kmeaw in this firmware; geohot for all of his tools and work; waninkoko for the same; the creators of multiMAN; and all the other great people of the PS3 modding scene that I have failed to mention. The scene is moving a mile a minute! Hell, by the time I finish writing this readme, everything will be different!! XD
 
Also many thanks to the websites of the scene, www.ps3-hacks.com, ps3news.com, psx-scene.net, ps3hax.net, and any other sites that keep us up-to-date on all developments within the community.
 
 
--QUESTIONS?COMMENTS?CONCERNS?--
 
Please post them in the comments section of whatever site you found this torrent. I have CHOSEN to upload it to http://www.demonoid.me/ but if it is anywhere else, although fine by me, I will most likely not see your comments. Best of luck!



comments powered by Disqus