Jump to content


PSVita UDCD USB Video Class plugin 1.7


¿Quieres enterarte al momento de las nuevas descargas? Síguenos en Twitter o Mastodon!

This is a kernel plugin that uses lets you stream your PSVita screen to your computer via USB.

How does it work?

The plugin uses the SceUdcd module of the PSVita OS to setup the necessary USB descriptors to simulate and behave as an USB Video Class device (like a webcam or an USB video capture card).

The hardware color space converter of the PSVita's SoC is used to perform the conversion to the destination pixel format; then the USB controller directly performs a DMA transfer from the physical address of the resulting converted framebuffer, and therefore, saving CPU usage and power consumption.

Supported formats and resolutions

  • 960x544 @ 30 FPS and (less than) 60 FPS
  • 896x504 @ 30 FPS and (almost) 60 FPS
  • 864x488 @ 30 FPS and 60 FPS
  • 480x272 @ 30 FPS and 60 FPS

Installation:

  • Copy udcd_uvc.skprx to your PSVita
  • Add udcd_uvc.skprx to taiHEN's config (ur0:/tai/config.txt or ux0:/tai/config.txt):
*KERNEL
ur0:tai/udcd_uvc.skprx

 

  • Reboot your PSVita.

Troubleshooting
If the video looks glitched, try to change the video player configuration to use the NV12 format or switch to another player (like PotPlayer or OBS).

If you use Windows 10 you might have to change the Camera access permissions on the Privacy Settings.

On Linux I recommend using mplayer (mplayer tv:// -tv driver=v4l2:device=/dev/videoX:width=960:height=544).

Audio noise fix:

  • Disable USB power supply (Settings > System)

Note: Remember that if anything goes wrong (like PSVita not booting) you can always press L at boot to skip plugin loading.

Note 2: No, it doesn't stream audio. For that use a 3.5mm jack to jack adapter (a ferrite bead might help reduce the electromagnetic noise).

by xerpi.


Que novedades incluye la versión 1.7

Released

  • Increase initial delay to 15s: should help fixing issues when a lot of plugins are loaded (UDCD UVC used to not work).
  • Fix UVC payload size to be 12B as per UVC spec: should fix support on macOS and Android. Thanks to @xfangfang for spotting the issue!

Files:

  • udcd_uvc.skprx: doesn't turn the display on/off
  • udcd_uvc_oled_off.skprx: turns the display on/off on OLED Vitas (Vita 1000)
  • udcd_uvc_lcd_off.skprx: turns the display on/off on LCD Vitas (Vita 2000)

No te pierdas nada, síguenos en Twitter o Mastodon!
¿Tienes alguna duda, petición o aporte? Utiliza el foro!

×
×
  • Crear nuevo...